PRODUCT
PRODUCT
HOME > Product center > Material Science > Cathode material
LPNTN62A
LPNTN62A：It is a single crystal ternary material with Ni content of 65 mol%, which has the advantages of high voltage, high voltage, high energy density, long life and high safety; It is suitable for square, cylindrical, pouch and other cells, and is used in the field of high energy density power batteries.
Main technical parameters：
| Project | Unit | Specifications | Typical value | Test method or equipment | |
| LiOH | ppm | ≤2000 | 1040 | Potentiometric titration | |
| Li₂CO₃ | ppm | ≤3000 | 2120 | Potentiometric titration | |
| PH | / | 11.7±0.5 | 11.54 | PH meter | |
| Moisture | % | ≤0.04 | 200 | Karl moisture tester | |
| TD | g/cm³ | ≥1.7 | 2.4 | Gravimetric method | |
| Granularity | D10 | um | ≥2.0 | 2.46 | LPSA |
| D50 | 4.0±1.0 | 4.35 | |||
| D90 | ≤10.0 | 7.47 | |||
| SSa | m²/g | 0.75±0.25 | 0.64 | BET | |
| Appearance | / | Black powder, no agglomeration. | Black powder, no agglomeration. | ||
| Main components | Project | Unit | Specifications | Typical value |
| Li | % | 7.3±0.5 | 7.25 | |
| Ni | mol% | 65.5±1 | 65.2 | |
| Co | 14.5±1 | 14.6 | ||
| Mn | 20.0±1 | 20.2 | ||
| Fe | ppm | ≤50 | 10 | |
| Cu | ppm | ≤20 | 2 | |
| Pb | ppm | ≤10 | 1 | |
| Ca | ppm | ≤100 | 25 | |
| Half-battery data（4.35～3.0V） | Capacity（1C） | mAh/g | ≥172 | 175.2 |
| Coulombic efficiency for the first time | % | ≥86.5 | 87.5 | |
| Circulate(50th) | % | ≥96 | 98.5 |
